Contact us directly: 07433 / 39 19 79 0 ↗︎Contact us by email
DeutschEnglish
relatioLighting that pays off.
Red vehicle body in an illuminated spray booth

instaSHIELD

Hazardous Areas

Specialist applications: booth lighting & explosion protection

For paint systems, booths and other specialist industrial applications: taran ATEX and the instaSHIELD jung luminaire families. Explosion-protection suitability depends on the particular version and application; not every jung version has Ex approval.

instaSHIELD / SPECIALIST INDUSTRIAL APPLICATIONS

Demanding environments.
Carefully selected lighting.

Paint systems, booths and industrial workstations place special demands on lighting and installation. In hazardous areas, the designated zone and the suitability of the selected version must match.

With instaSHIELD taran ATEX and the luminaires in instaSHIELD jung let us examine your specialist application in detail. Not every version has Ex approval. Together, we clarify the location, installation and required properties before selecting the right luminaire.

Paint systemsBoothsIndustry
instaSHIELD

taran ATEX

taran ATEX is an LED weatherproof luminaire for hazardous areas. The white plastic housing is rated IP66 for protection against dust and powerful water jets.

The luminaire is available at 4000K (neutral white) or 6000K (cool white). The 6000K version delivers 7250 lumens at 48.3W. It has five-pole through-wiring and is intended for indoor and outdoor areas. taran is based on the following specifications: EN 2014/34/EU ATEX II 3G Ex nR IIC T6 Gc, EN 2014/34/EU ATEX II 3D Ex tc IIIC T85°C Dc.

Length / power
157.2cm/48.3W
Luminous flux / light colour
7250lm (6000K)/4000 or 6000K
IP rating / beam angle
IP66/120°
Rated service life
70,000h (L80/B50)

taran ATEX enquire directly ↗


instaSHIELD jung

Workstation luminaires

Directed lighting for careful work. These LED workstation luminaires combine a durable sheet-steel housing with a safety-glass cover. They suit industrial and trade workstations.

The adjustable JAPL range is available for wall or ceiling surface mounting and suspension, allowing light to be directed towards the work surface. Light colour, dimming and fixings are matched to the application.

LED ranges
JAPL/JAPH; JAPO for mounting on glass elements
Housing/cover
Sheet steel/4mm toughened safety glass
Standard finish
RAL9016
JAPLLED IP rating
IP65
JAPLLED supply
220–240V/50–60Hz
Ex option
JAPLLED for zone 2/22; JAPO without Ex approval

jung Workstation luminaires enquire directly ↗

View manufacturer's brochure ↗︎


instaSHIELD jung

Sloped-housing luminaires

Robust construction. Easy cleaning. These sloped-housing LED luminaires are designed for paint systems, clean rooms and the chemical industry. Their sloping sheet-steel housing and flush glass panel simplify cleaning.

The lighting insert swings out and can be replaced. Different LED ranges are available to suit the mounting task and Ex zone; housing finish, light colour and dimmable versions are agreed for each project.

LED ranges
JSS/JBS/JSH/JBH/JSSN/JSN/JBN
Housing/cover
Sheet steel/6mm toughened safety glass
IP rating
IP64
Supply
220–240V/50–60Hz
Ex versions
Zone 2/22; JSS1LED/JSH1LED also zone 1/21
Installation
Recessed/surface-mounted/suspended – depending on version

jung Sloped-housing luminaires enquire directly ↗

View manufacturer's brochure ↗︎


instaSHIELD jung

Booth luminaires

Lighting where surfaces take shape. These LED booth luminaires support paint-system lighting, including vehicle and aircraft manufacturing. Symmetrical or asymmetrical distribution allows the lighting to suit booth geometry and the visual task.

Externally fitted versions mount outside customer-provided glass panels; recessed and surface-mounted versions offer further installation options. The appropriate body, cover and Ex version are selected for the booth.

LED ranges
JANS/JANK/JES/JEB/JFZS/JFZ/JLZ/JELZ
Housing
Powder-coated sheet steel
Standard finish
RAL9016
Light distribution
Symmetrical/Asymmetrical
Installation
External/recessed/surface mounting – depending on range
Selection
Dimensions, IP rating and Ex zone depend on version

jung Booth luminaires enquire directly ↗

View manufacturer's brochure ↗︎


instaSHIELD jung

Floor luminaires

Inspect surfaces from another perspective. JBGD walk-over LED floor luminaires are intended for flush installation in industrial floors. They illuminate components from below to support visual surface inspection.

A black sheet-steel housing and laminated safety glass provide robust construction. Combined with suitable surface-inspection luminaires, they can create a complete inspection ring. The mounting frame and version are matched to the floor construction.

LED range
JBGD..LED
Housing
Sheet steel/RAL9005
Cover
Laminated safety glass
IP rating
IP65
Supply
220–240V/50–60Hz
Installation
Flush floor mounting/Walk-over

jung Floor luminaires enquire directly ↗

View manufacturer's brochure ↗︎


instaSHIELD jung

Warning luminaires

Make operating conditions clearly visible. JLEDW1 LED warning luminaires display instructions, warnings and machine status using two independently controlled illuminated fields. The glass panel carries high-voltage and earthing symbols.

The powder-coated sheet-steel housing is available for wall surface mounting or recessed wall mounting. LED versions operate at 24V DC; signalling and integration are agreed to suit your installation.

LED range
JLEDW1
Supply
24V DC
LED power – depending on version
2×13.2W/2×28.8W
IP rating
IP65
Signal fields
2 separate circuits
Ex version
Zone 2/22

jung Warning luminaires enquire directly ↗

View manufacturer's brochure ↗︎

View all instaSHIELD product groups ↗︎

EXPLORE MORE

A different task? A different lighting solution.

QUESTIONS & ANSWERS

Frequently asked questions about instaSHIELD specialist applications

Four answers to help you choose and plan.

Are all the luminaires shown approved for hazardous areas?

No. Alongside taran ATEX, this range includes different specialist industrial luminaires. For instaSHIELD jung, suitability for hazardous areas depends on the specific version.

What information is required for an Ex luminaire?

We need the zone designated for the installation location and the other requirements in the explosion-protection concept. These are checked against the marking and documentation of the proposed luminaire.

Which solution suits a booth or industrial workstation?

That depends on installation conditions, the environment and visual task. Workstation, sloped-housing, booth, floor and warning luminaires serve different purposes and are selected to match the installation.

Can an existing specialist luminaire simply be replaced?

Before replacement, fitting dimensions, fixings, connections and required approvals must be checked. Photographs, the rating plate and installation documentation help with assessment.

Still have a question? Talk to us ↗

LET'S SHED LIGHT ON YOUR PROJECT

What are
you planning?

An entire hall. Individual workstations.
Or perhaps an initial question.
We look forward to hearing about your project.

↗︎

relatio TM GmbH
Stocken 4 · 72336 Balingen

01 Application02 Project03 Contact
Where do you need better lighting?

Choose the application that best matches your project.

No-obligation enquiry · Sent directly through our mail server.

OUR CUSTOMERS

Your trust drives us.

Discuss your project ↗︎

Your enquiry list

Save products, choose quantities and send a single, no-obligation enquiry.

Your enquiry list is empty. Choose “add to enquiry list” beside a product.