Contact us directly: 07433 / 39 19 79 0 ↗︎Contact us by email
DeutschEnglish
relatioLighting that pays off.
Vehicle in an automatic car wash with wet floors

Spaces & applications / Damp locations

DAMP LOCATIONS & WASH BAYS

Better lighting.
Even when things get wet.

Water, condensation and regular cleaning place particular demands on lighting. In wash bays, washrooms and damp working areas, distribution, housings and materials must match the actual exposure.

What matters ↓

THE REQUIREMENTS

What matters in damp locations.

01

Assess exposure to moisture correctly

High humidity, condensation, splashes and direct cleaning jets are different conditions. We assess where and how luminaires will be used and cleaned.

02

Choose suitable materials

Cleaning products can affect seals, covers and housings. The documented resistance of the specific version and the substances used are decisive.

03

Sicher sehen and arbeiten

Wet surfaces reflect light. Even, low-glare illumination supports orientation and helps people recognise vehicles, work areas and obstacles in time.

LIGHTING DESIGN & REGULATIONS

Consider moisture and cleaning together.

Lighting requirements follow the specific activity. ASR A3.4 provides the basis for workplaces; for vehicle washes, DGUV Information 208-054 supplements assessment of workstations, traffic routes and electrical installations.

Design criteria for wet working areas
ExposureWhat matters
IP ratings explained brieflyThe first digit describes protection against contact and solid foreign objects; the second describes protection against water. IP ratings must not be confused with electrical protection classes I, II and III.
IP44 · Splashing waterProtected against solid objects of 1mm or larger and splashing water from any direction.
IP65 · Water jetsDust-tight and protected against water jets.
IP66 · Powerful water jetsDust-tight and protected against powerful water jets. This is not blanket approval for high-pressure or hot-water cleaning.
Spritzwasser and KondensatSuitable IP rating, seals, mounting position and permitted operating conditions
Cleaning with pressure or hot waterSpecific manufacturer approval for pressure, temperature, distance and cleaning method
Reinigungsmittel and feuchte LuftMaterial resistance and corrosion protection based on the cleaning agents and concentrations used

An IP rating alone does not establish chemical resistance or suitability for every high-pressure cleaning process. The specific product version must suit the application.

IP rating gezielt bestimmen

A wash bay and a dry plant room do not automatically need the same luminaire. Location, water exposure and cleaning determine the required version.

Avoid reflections

Shiny vehicles, tiles and wet surfaces can cause glare. Mounting height, sightlines and distribution are planned together.

Work with a qualified electrical contractor

We coordinate electrical installation, protective measures and mounting with your electrical contractor or our specialist partners. Maintenance access and regular inspections are considered too.

Welche Light colour passt?

Neutral white around 4000K is a versatile starting point for wash bays and damp working areas. 6000K may also suit technical tasks. Light colour, colour rendering and glare are coordinated with the activity; a higher Kelvin value does not replace a suitable IP rating or adequate illuminance.

Fachliche Grundlagen and Quellen

Editorially reviewed on 30 October 2026. The final design is established for the particular use.

TAKE A CLOSER LOOK

One area. Different conditions.

Car washes & wash bays

Spray, moving vehicles and cleaning determine the design. Traffic routes and working areas should be clearly visible without distracting reflections.

Washrooms & wet areas

Condensation and frequent cleaning also occur outside car washes. We select lighting according to the actual environment and intended use.

FROM THE ROOM TO THE SOLUTION

instaSHIELD for wet environments.

These products are a starting point for selection. We assess each version against actual water exposure, cleaning conditions and product data.

LIGHTING THAT PAYS OFF.

What could an upgrade achieve
for your spaces?

Quantity, existing power and operating hours show how your electricity costs could change. Our calculator provides an initial model using your own figures.

Calculate your own payback ↗︎

MORE SPACES

What else is part of your project?

Back to the room overview ↗︎

LET'S SHED LIGHT ON YOUR PROJECT

What are
you planning?

An entire hall. Individual workstations.
Or perhaps an initial question.
We look forward to hearing about your project.

↗︎

relatio TM GmbH
Stocken 4 · 72336 Balingen

01 Application02 Project03 Contact
Where do you need better lighting?

Choose the application that best matches your project.

No-obligation enquiry · Sent directly through our mail server.

OUR CUSTOMERS

Your trust drives us.

Discuss your project ↗︎

Your enquiry list

Save products, choose quantities and send a single, no-obligation enquiry.

Your enquiry list is empty. Choose “add to enquiry list” beside a product.